Miatapower List Archive

This read-only message was archived from a public mail list.
Mail From: "Tommy Gabe" <(email redacted)>


Thanks Emmet I'll be sure to mention your name when I talk to Mike.

Tommy G
----- Original Message -----
From: <(email redacted)>
To: <(email redacted)>; <(email redacted)>
Sent: Friday, August 11, 2000 10:49 AM
Subject: Re: Greddy exaust gasket


>
> In a message dated 8/11/00 2:50:55 AM Central Daylight Time,
> (email redacted) writes:
>
> << Does anyone know where I can go to get a new gasket, turbo - exhaust, for
> a Greddy set up. >>
> Check with TAD Motorsports (847)550-8116. They were able to get me one when I
> needed it last year. Tell them that Emmett sent you and that you have the
> same turbo setup as I do. Don't know how much I paid. Don't leave a message
> on the machine. Keep calling till they answer then ask for Mike.
>
> Emmett Burke

This read-only message was archived from a public mail list.
Mail From: "Tommy Gabe" <(email redacted)>

I need the gasket between the turbo and the down pipe - sorry for beeing =
unclear.

It's useful to know where to get the turbo to manifold gasket when it =
brakes though, thanks.

Tommy G
----- Original Message -----=20
From: Jerry Wellborn=20
To: 'Tommy Gabe' ; (email redacted)=20
Sent: Friday, August 11, 2000 1:37 PM
Subject: RE: Greddy exaust gasket


I tried to get one recently. After having a local shop try to order =
one from GReddy for about three weeks they finally said that GReddy was =
unable to supply one, but GReddy said that a gasket off a Nissan 300ZX =
twin turbo would work. I bought one for a 1990 model. The hole in the =
middle is a slightly different shape. I called GReddy, and the guy I =
spoke to acknowledged this but said it would work fine. I've posted a =
picture at home.swbell.net/donutboy/miata/gaskets.jpg.

=20

Jerry

=20

=20

=20

=20

-----Original Message-----
From: (email redacted) =
[mailto:(email redacted)]On Behalf Of Tommy Gabe
Sent: Friday, August 11, 2000 2:52 AM
To: (email redacted)
Subject: Greddy exaust gasket

=20

Does anyone know where I can go to get a new gasket, turbo - exhaust, =
for a Greddy set up. The TD 04 turbo used in the kit should be a =
Mitsubishi turbo, does anyone know on which model and year this can be =
found.

=20

Tried calling a Mitsubishi dealer/shop. The only language they =
understand is Model / Year / Part number.

=20

I have tried calling some of the guys selling the Greddy kits, but =
they seem to only have the complete kits. $ 1600 for gasket seems a bit =
expensive :)

=20

Tommy G