Miatapower List Archive

This read-only message was archived from a public mail list.
Mail From: "Jacobs, Greg" <(email redacted)>

Well, I got the pulley from Magnussen and it works great..................!!
I dont; know how many more they have, but they do exist...............get
your today!!!

I am getting 8.5 lbs!! no pinging with an MSD and 10'

> Gregory S. Jacobs
> * Manager, Network Operations Enron Energy Services
> * voice: (925) 543 - 3570 12647 Alcosta Blvd. Suite
> 475
> * pager: (888) 397 - 5832 San Ramon, CA 94583
> * e-mail: (email redacted)
> * e-mail: (email redacted)
>
> -----Original Message-----
> From: Ray Ayala [SMTP:(email redacted)]
> Sent: Friday, November 06, 1998 9:50 AM
> To: David Gish; (email redacted)
> Cc: (email redacted); (email redacted)
> Subject: SSCOR Re: 8 PSI Upgade Installed
>
> At 09:53 AM 11/6/98 -0500, David Gish wrote:
> >
> ...noticeable power increase, boost gauge reads 8PSI, J&S shows
> >slightly more retard under WOT (I'm running at 12deg), hearing a ping now
> >and then (had that at 6PSI occasionally)
> >
> Does your setup have an IC? - Ray
> -
> Send submissions to (email redacted)
> To unsubscribe, email (email redacted) with
> "unsubscribe sscor" in the body of the message.

This read-only message was archived from a public mail list.
Mail From: "Jacobs, Greg" <(email redacted)>

OK, here's the scoop.

Magnussen DOES NOT MAKE THE PULLEY. I do not have any contact information
for you guys. I am assuming that I lucked out................They had sent
me a pulley for the new type of blower. I raised quite a stink over the fact
that they sold me a part that I could not use. Magically, the right pulley
came in the mail. I don't know about stock on hand, nor availability.
Magnussen informed me that they do not manufacture the pulley and all Miata
buis went to MOSS. Since then I have received numerous emails about the WHO
WHAT WHEN and WHERE............I don't have the answers..................I
am not making blanket statements about Magnussen's policy.

Please, I do not have any answers for you guys.....I'm only the
messenger........

> Gregory S. Jacobs
> * Manager, Network Operations Enron Energy Services
> * voice: (925) 543 - 3570 12647 Alcosta Blvd. Suite
> 475
> * pager: (888) 397 - 5832 San Ramon, CA 94583
> * e-mail: (email redacted)
> * e-mail: (email redacted)
>
> -----Original Message-----
> From: Jacobs, Greg [SMTP:(email redacted)]
> Sent: Saturday, November 07, 1998 8:49 PM
> To: 'Ray Ayala'; David Gish; (email redacted)
> Cc: (email redacted); (email redacted)
> Subject: RE: SSCOR Re: 8 PSI Upgade Installed
>
> Well, I got the pulley from Magnussen and it works
> great..................!!
> I dont; know how many more they have, but they do exist...............get
> your today!!!
>
> I am getting 8.5 lbs!! no pinging with an MSD and 10'
>
> > Gregory S. Jacobs
> > * Manager, Network Operations Enron Energy Services
> > * voice: (925) 543 - 3570 12647 Alcosta Blvd. Suite
> > 475
> > * pager: (888) 397 - 5832 San Ramon, CA 94583
> > * e-mail: (email redacted)
> > * e-mail: (email redacted)
> >
> > -----Original Message-----
> > From: Ray Ayala [SMTP:(email redacted)]
> > Sent: Friday, November 06, 1998 9:50 AM
> > To: David Gish; (email redacted)
> > Cc: (email redacted); (email redacted)
> > Subject: SSCOR Re: 8 PSI Upgade Installed
> >
> > At 09:53 AM 11/6/98 -0500, David Gish wrote:
> > >
> > ...noticeable power increase, boost gauge reads 8PSI, J&S shows
> > >slightly more retard under WOT (I'm running at 12deg), hearing a ping
> now
> > >and then (had that at 6PSI occasionally)
> > >
> > Does your setup have an IC? - Ray
> > -
> > Send submissions to (email redacted)
> > To unsubscribe, email (email redacted) with
> > "unsubscribe sscor" in the body of the message.
> -
> Send submissions to (email redacted)
> To unsubscribe, email (email redacted) with
> "unsubscribe sscor" in the body of the message.

This read-only message was archived from a public mail list.
Mail From: (email redacted)

My guess is that Magnussen is a distributor and factory authorized repair
center for Eaton. If that is correct, they probably only get involved when
Eaton parts or blower warranty is involved. Although I do understand they do
the "S" trim modifications to the early Sebring blowers, and will
refurbish/rebuild Eaton blowers.

I guess they have to be careful not to get into the middle of "end-user" sales
outfits' business. The business world can get very convoluted, sometimes!

Bill Allen