Miatapower List Archive

This read-only message was archived from a public mail list.
Mail From: (email redacted)


Last night I took my car out and figured that I would make an attempt to do
some dataloging. I have'nt really used my palm pilot yet and was having
trouble getting it to connect properly. In the edit text mode what setting do
I use 1.6, 1.8, or 1.6/1.8. The chip in my 92 1.6 is RAYS 1.6 991205A. What
else should I check?

Emmett Burke

This read-only message was archived from a public mail list.
Mail From: (email redacted) (Mike Inman)


At 02:09 PM 1/9/00 -0500, you wrote:
>
>Last night I took my car out and figured that I would make an attempt to do
>some dataloging. I have'nt really used my palm pilot yet and was having
>trouble getting it to connect properly. In the edit text mode what setting
do
>I use 1.6, 1.8, or 1.6/1.8. The chip in my 92 1.6 is RAYS 1.6 991205A. What
>else should I check?

There are so many "flavors" of datastream out at this point, that I
recommend sitting in the driveway at idle, and going from "Edit Text /E" to
"Collect /C" and checking the different formats 1 by 1 until you get
satisfactory response.

If you have one of the newer datastreams (Ray?) that can do "Native mode",
don't select Native mode - it will only serve to confuse AnaLink's poor,
out of date algorithms.

M

>
> Emmett Burke
>

This read-only message was archived from a public mail list.
Mail From: Ray & Cindy Ayala <(email redacted)>


Make sure that the % sign is turned on (using middle buttons) in the master
fuel screen.

Mike Inman wrote:
>
> At 02:09 PM 1/9/00 -0500, you wrote:
> >
> >Last night I took my car out and figured that I would make an attempt to do
> >some dataloging. I have'nt really used my palm pilot yet and was having
> >trouble getting it to connect properly. In the edit text mode what setting
> do
> >I use 1.6, 1.8, or 1.6/1.8. The chip in my 92 1.6 is RAYS 1.6 991205A. What
> >else should I check?
>
> There are so many "flavors" of datastream out at this point, that I
> recommend sitting in the driveway at idle, and going from "Edit Text /E" to
> "Collect /C" and checking the different formats 1 by 1 until you get
> satisfactory response.
>
> If you have one of the newer datastreams (Ray?) that can do "Native mode",
> don't select Native mode - it will only serve to confuse AnaLink's poor,
> out of date algorithms.
>
> M
>
> >
> > Emmett Burke
> >