Miatapower List Archive
oil problem...more info - typo correct
Posted by mailbot
|
mailbot
Mail List Archive Bot
., Online, USA
|
Topic Creator (OP)
Jul 26, 2007 12:05 PM
Joined 15 years ago
227,243 Posts
|
This read-only message was archived from a public mail list.
Mail From: (email redacted)
In a message dated 7/26/2007 11:45:31 A.M. Eastern Standard Time,
(email redacted) writes:
i couldnt help but look closer this morning. the oil pan seems to be
relatively dry and i see a threaded hole with oil seeping out. it is on the read
of the left block as close to the end plate as possible and still being on
the block. the hole faces the left and is above the dipstick. i do not have
any extra parts which would unless it should be a bolt, (i have some old
bolts i replaced and a couple wire brackets but i will find someones car to see
how they go in). it sorta looks like an oil sender type of port....i also
think i see it in the manual diagrams but i dont see any thing being associated
with it...
ideas?
small steps forward.
That should by oil line tap area, not tape area....
************************************** Get a sneak peek of the all-new AOL at
discover.aol.com/memed/aolcom30tour
Mail From: (email redacted)
In a message dated 7/26/2007 11:45:31 A.M. Eastern Standard Time,
(email redacted) writes:
i couldnt help but look closer this morning. the oil pan seems to be
relatively dry and i see a threaded hole with oil seeping out. it is on the read
of the left block as close to the end plate as possible and still being on
the block. the hole faces the left and is above the dipstick. i do not have
any extra parts which would unless it should be a bolt, (i have some old
bolts i replaced and a couple wire brackets but i will find someones car to see
how they go in). it sorta looks like an oil sender type of port....i also
think i see it in the manual diagrams but i dont see any thing being associated
with it...
ideas?
small steps forward.
That should by oil line tap area, not tape area....
************************************** Get a sneak peek of the all-new AOL at
discover.aol.com/memed/aolcom30tour
|
mailbot
Mail List Archive Bot
., Online, USA
|
Topic Creator (OP)
Jul 26, 2007 12:52 PM
Joined 15 years ago
227,243 Posts
|
This read-only message was archived from a public mail list.
Mail From: Flash. <(email redacted)>
So I shouldnt cover this hole with duct tape and forget it?
On 7/26/07, (email redacted) <(email redacted)> wrote:
>
> In a message dated 7/26/2007 11:45:31 A.M. Eastern Standard Time,
> (email redacted) writes:
> i couldnt help but look closer this morning. the oil pan seems to be
> relatively dry and i see a threaded hole with oil seeping out. it is on
> the read of the left block as close to the end plate as possible and still
> being on the block. the hole faces the left and is above the dipstick. i
> do not have any extra parts which would unless it should be a bolt, (i have
> some old bolts i replaced and a couple wire brackets but i will find
> someones car to see how they go in). it sorta looks like an oil sender type
> of port....i also think i see it in the manual diagrams but i dont see any
> thing being associated with it...
>
> ideas?
> small steps forward.
> That should by oil line tap area, not tape area....
>
>
> ________________________________
> Get a sneak peek of the all-new AOL.com.
--
btdtracing.com
97 STS2 CRX & 97 SpecMiata
1991 Mazda Miata Hardtop for sale - $999
Mail From: Flash. <(email redacted)>
So I shouldnt cover this hole with duct tape and forget it?
On 7/26/07, (email redacted) <(email redacted)> wrote:
>
> In a message dated 7/26/2007 11:45:31 A.M. Eastern Standard Time,
> (email redacted) writes:
> i couldnt help but look closer this morning. the oil pan seems to be
> relatively dry and i see a threaded hole with oil seeping out. it is on
> the read of the left block as close to the end plate as possible and still
> being on the block. the hole faces the left and is above the dipstick. i
> do not have any extra parts which would unless it should be a bolt, (i have
> some old bolts i replaced and a couple wire brackets but i will find
> someones car to see how they go in). it sorta looks like an oil sender type
> of port....i also think i see it in the manual diagrams but i dont see any
> thing being associated with it...
>
> ideas?
> small steps forward.
> That should by oil line tap area, not tape area....
>
>
> ________________________________
> Get a sneak peek of the all-new AOL.com.
--
btdtracing.com
97 STS2 CRX & 97 SpecMiata
1991 Mazda Miata Hardtop for sale - $999
Sorry, you can't reply to this topic. It has been closed.
Having trouble posting or changing forum settings?
Read the Forum Help (FAQ) or click Contact Support at the bottom of the page.







