Miatapower List Archive

This read-only message was archived from a public mail list.
Mail From: "Jason C" <(email redacted)>

FYI these 3 oil filters are interchangeable on my car without the intake
manifold support beam.
The Integra one may fit the miata with the support beam.
(Data from the Wix site)

Acura RSX and MDX and TSX
--------------------------------------

Part Number: 51356
UPC Number: 765809513563 All Applications
Style: Spin-On Lube
Service: Lube
Type: Full Flow
Media: Paper
Height: 3.402
Outer Diameter Top: 2.685
Outer Diameter Bottom: Closed
Thread Size: 20X1.5 MM
By-Pass Valve Setting-PSI: 8-11
Anti-Drain Back Valve: Yes

Gasket Diameters
Number O.D. I.D. Thk.
Attached 2.475 2.173 0.233



'97 Acura Integra, Honda Civic
-------------------------------

Part Number: 51334
UPC Number: 765809513341 All Applications
Style: Spin-On Lube Service: Lube Type: Full Flow
Media: Paper
Height: 3.194 Outer Diameter Top: 3.252
Outer Diameter Bottom: Closed
Thread Size: 20X1.5 MM
By-Pass Valve Setting-PSI: 8-11
Anti-Drain Back Valve: Yes

Gasket Diameters
Number O.D. I.D. Thk.
Attached 2.475 2.173 0.233



Miata, RX-8
-----------------
Part Number: 51365
UPC Number: 765809513655
All Applications
Style: Spin-On Lube
Service: Lube
Type: Full Flow
Media: Paper
Height: 2.577
Outer Diameter Top: 2.685
Outer Diameter Bottom: Closed
Thread Size: 20X1.5 MM
By-Pass Valve Setting-PSI: 8-11
Anti-Drain Back Valve: Yes

Gasket Diameters
Number O.D. I.D. Thk.
Attached 2.475 2.173 0.233

This read-only message was archived from a public mail list.
Mail From: William Howell <(email redacted)>

I use the Wix 51334 on my 99. Fits with the brace, no problem.

On the Protege 5, I use an oversized Wix (same specs as the 51344), which is the
51344. It will not fit with the brace, though.

Billy


Quoting Jason C <(email redacted)>:

> FYI these 3 oil filters are interchangeable on my car without the intake
> manifold support beam.
> The Integra one may fit the miata with the support beam.
> (Data from the Wix site)
>
> Acura RSX and MDX and TSX
> --------------------------------------
>
> Part Number: 51356
> UPC Number: 765809513563 All Applications
> Style: Spin-On Lube
> Service: Lube
> Type: Full Flow
> Media: Paper
> Height: 3.402
> Outer Diameter Top: 2.685
> Outer Diameter Bottom: Closed
> Thread Size: 20X1.5 MM
> By-Pass Valve Setting-PSI: 8-11
> Anti-Drain Back Valve: Yes
>
> Gasket Diameters
> Number O.D. I.D. Thk.
> Attached 2.475 2.173 0.233
>
>
>
> '97 Acura Integra, Honda Civic
> -------------------------------
>
> Part Number: 51334
> UPC Number: 765809513341 All Applications
> Style: Spin-On Lube Service: Lube Type: Full Flow
> Media: Paper
> Height: 3.194 Outer Diameter Top: 3.252
> Outer Diameter Bottom: Closed
> Thread Size: 20X1.5 MM
> By-Pass Valve Setting-PSI: 8-11
> Anti-Drain Back Valve: Yes
>
> Gasket Diameters
> Number O.D. I.D. Thk.
> Attached 2.475 2.173 0.233
>
>
>
> Miata, RX-8
> -----------------
> Part Number: 51365
> UPC Number: 765809513655
> All Applications
> Style: Spin-On Lube
> Service: Lube
> Type: Full Flow
> Media: Paper
> Height: 2.577
> Outer Diameter Top: 2.685
> Outer Diameter Bottom: Closed
> Thread Size: 20X1.5 MM
> By-Pass Valve Setting-PSI: 8-11
> Anti-Drain Back Valve: Yes
>
> Gasket Diameters
> Number O.D. I.D. Thk.
> Attached 2.475 2.173 0.233
>
>
>

This read-only message was archived from a public mail list.
Mail From: Ian McCloghrie <(email redacted)>

On Oct 18, 2004 "Jason C" wrote:
> FYI these 3 oil filters are interchangeable on my car without the intake
> manifold support beam.

I accidentally bought an RSX filter once (transposed the last two digits
from the Miata one), discovered that it fit and worked, and have been
using it ever since. I have a remote filter mount kit, though.

--Ian

This read-only message was archived from a public mail list.
Mail From: "Tom Graham" <(email redacted)>

I use the Pure One PL14459 which is a Honda filter as well as the filter
used on most Mazda's before 1990. This I found because a Pure One wasn't
listed for a Miata. I checked the 323 (same block) and this was the filter
used. I targeted the Pure One because it was the filter that my research
indicated was the best I could get. I pay $4.99 each and my wife's Accord
uses the same filter. There is a good chance I wasn't the first to promote
the Pure One but there is a better chance I was. :^)

Tom


----- Original Message -----

> FYI these 3 oil filters are interchangeable on my car without the intake
> manifold support beam.
> The Integra one may fit the miata with the support beam.
> (Data from the Wix site)
>
> Acura RSX and MDX and TSX
> --------------------------------------
>
> Part Number: 51356
> UPC Number: 765809513563 All Applications
> Style: Spin-On Lube
> Service: Lube
> Type: Full Flow
> Media: Paper
> Height: 3.402
> Outer Diameter Top: 2.685
> Outer Diameter Bottom: Closed
> Thread Size: 20X1.5 MM
> By-Pass Valve Setting-PSI: 8-11
> Anti-Drain Back Valve: Yes
>
> Gasket Diameters
> Number O.D. I.D. Thk.
> Attached 2.475 2.173 0.233
>
>
>
> '97 Acura Integra, Honda Civic
> -------------------------------
>
> Part Number: 51334
> UPC Number: 765809513341 All Applications
> Style: Spin-On Lube Service: Lube Type: Full Flow
> Media: Paper
> Height: 3.194 Outer Diameter Top: 3.252
> Outer Diameter Bottom: Closed
> Thread Size: 20X1.5 MM
> By-Pass Valve Setting-PSI: 8-11
> Anti-Drain Back Valve: Yes
>
> Gasket Diameters
> Number O.D. I.D. Thk.
> Attached 2.475 2.173 0.233
>
>
>
> Miata, RX-8
> -----------------
> Part Number: 51365
> UPC Number: 765809513655
> All Applications
> Style: Spin-On Lube
> Service: Lube
> Type: Full Flow
> Media: Paper
> Height: 2.577
> Outer Diameter Top: 2.685
> Outer Diameter Bottom: Closed
> Thread Size: 20X1.5 MM
> By-Pass Valve Setting-PSI: 8-11
> Anti-Drain Back Valve: Yes
>
> Gasket Diameters
> Number O.D. I.D. Thk.
> Attached 2.475 2.173 0.233
>
>
>
>

This read-only message was archived from a public mail list.
Mail From: "Bob Hotaling" <(email redacted)>

Tom;

I've used that particular filter on 1.6 and 1.8 Miatas and have found the
cold (if there is such a thing in FL) motor oil pressure seems to stay high
longer before dropping into a normal operating range. Have you seen that
too?

Bob


----- Original Message -----
From: "Tom Graham" <(email redacted)>
To: <(email redacted)>
Sent: Monday, October 18, 2004 7:56 PM
Subject: Re: Oil filters from other cars on Miata


>I use the Pure One PL14459 which is a Honda filter as well as the filter
> used on most Mazda's before 1990. This I found because a Pure One wasn't
> listed for a Miata. I checked the 323 (same block) and this was the filter
> used. I targeted the Pure One because it was the filter that my research
> indicated was the best I could get. I pay $4.99 each and my wife's Accord
> uses the same filter. There is a good chance I wasn't the first to promote
> the Pure One but there is a better chance I was. :^)
>
> Tom
>
>
> ----- Original Message -----
>
>> FYI these 3 oil filters are interchangeable on my car without the intake
>> manifold support beam.
>> The Integra one may fit the miata with the support beam.
>> (Data from the Wix site)
>>
>> Acura RSX and MDX and TSX
>> --------------------------------------
>>
>> Part Number: 51356
>> UPC Number: 765809513563 All Applications
>> Style: Spin-On Lube
>> Service: Lube
>> Type: Full Flow
>> Media: Paper
>> Height: 3.402
>> Outer Diameter Top: 2.685
>> Outer Diameter Bottom: Closed
>> Thread Size: 20X1.5 MM
>> By-Pass Valve Setting-PSI: 8-11
>> Anti-Drain Back Valve: Yes
>>
>> Gasket Diameters
>> Number O.D. I.D. Thk.
>> Attached 2.475 2.173 0.233
>>
>>
>>
>> '97 Acura Integra, Honda Civic
>> -------------------------------
>>
>> Part Number: 51334
>> UPC Number: 765809513341 All Applications
>> Style: Spin-On Lube Service: Lube Type: Full Flow
>> Media: Paper
>> Height: 3.194 Outer Diameter Top: 3.252
>> Outer Diameter Bottom: Closed
>> Thread Size: 20X1.5 MM
>> By-Pass Valve Setting-PSI: 8-11
>> Anti-Drain Back Valve: Yes
>>
>> Gasket Diameters
>> Number O.D. I.D. Thk.
>> Attached 2.475 2.173 0.233
>>
>>
>>
>> Miata, RX-8
>> -----------------
>> Part Number: 51365
>> UPC Number: 765809513655
>> All Applications
>> Style: Spin-On Lube
>> Service: Lube
>> Type: Full Flow
>> Media: Paper
>> Height: 2.577
>> Outer Diameter Top: 2.685
>> Outer Diameter Bottom: Closed
>> Thread Size: 20X1.5 MM
>> By-Pass Valve Setting-PSI: 8-11
>> Anti-Drain Back Valve: Yes
>>
>> Gasket Diameters
>> Number O.D. I.D. Thk.
>> Attached 2.475 2.173 0.233
>>
>>
>>
>>
>

This read-only message was archived from a public mail list.
Mail From: "Tom Graham" <(email redacted)>

Hi Bob,

I don't have a time comparison between filters but yes I do notice the oil
pressure is high when cold. Since the oil pressure is taken after the filter
if you notice another filter has less oil pressure the filter would be
restrictive and the oil is bypassing at the pump before it gets into the oil
system.

This could be interpreted as good or bad. Another oil filter may have a more
restrictive media than the Pure One or the Pure One may have it's bypass
valve open longer. The Pure One does have the largest media surface area of
the common filters.

Tom

----- Original Message -----

> Tom;
>
> I've used that particular filter on 1.6 and 1.8 Miatas and have found the
> cold (if there is such a thing in FL) motor oil pressure seems to stay
high
> longer before dropping into a normal operating range. Have you seen that
> too?
>
> Bob
>
>
> ----- Original Message -----

>
>
> >I use the Pure One PL14459 which is a Honda filter as well as the filter
> > used on most Mazda's before 1990. This I found because a Pure One wasn't
> > listed for a Miata. I checked the 323 (same block) and this was the
filter
> > used. I targeted the Pure One because it was the filter that my research
> > indicated was the best I could get. I pay $4.99 each and my wife's
Accord
> > uses the same filter. There is a good chance I wasn't the first to
promote
> > the Pure One but there is a better chance I was. :^)
> >
> > Tom
> >
> >
> > ----- Original Message -----
> >
> >> FYI these 3 oil filters are interchangeable on my car without the
intake
> >> manifold support beam.
> >> The Integra one may fit the miata with the support beam.
> >> (Data from the Wix site)
> >>
> >> Acura RSX and MDX and TSX
> >> --------------------------------------
> >>
> >> Part Number: 51356
> >> UPC Number: 765809513563 All Applications
> >> Style: Spin-On Lube
> >> Service: Lube
> >> Type: Full Flow
> >> Media: Paper
> >> Height: 3.402
> >> Outer Diameter Top: 2.685
> >> Outer Diameter Bottom: Closed
> >> Thread Size: 20X1.5 MM
> >> By-Pass Valve Setting-PSI: 8-11
> >> Anti-Drain Back Valve: Yes
> >>
> >> Gasket Diameters
> >> Number O.D. I.D. Thk.
> >> Attached 2.475 2.173 0.233
> >>
> >>
> >>
> >> '97 Acura Integra, Honda Civic
> >> -------------------------------
> >>
> >> Part Number: 51334
> >> UPC Number: 765809513341 All Applications
> >> Style: Spin-On Lube Service: Lube Type: Full Flow
> >> Media: Paper
> >> Height: 3.194 Outer Diameter Top: 3.252
> >> Outer Diameter Bottom: Closed
> >> Thread Size: 20X1.5 MM
> >> By-Pass Valve Setting-PSI: 8-11
> >> Anti-Drain Back Valve: Yes
> >>
> >> Gasket Diameters
> >> Number O.D. I.D. Thk.
> >> Attached 2.475 2.173 0.233
> >>
> >>
> >>
> >> Miata, RX-8
> >> -----------------
> >> Part Number: 51365
> >> UPC Number: 765809513655
> >> All Applications
> >> Style: Spin-On Lube
> >> Service: Lube
> >> Type: Full Flow
> >> Media: Paper
> >> Height: 2.577
> >> Outer Diameter Top: 2.685
> >> Outer Diameter Bottom: Closed
> >> Thread Size: 20X1.5 MM
> >> By-Pass Valve Setting-PSI: 8-11
> >> Anti-Drain Back Valve: Yes
> >>
> >> Gasket Diameters
> >> Number O.D. I.D. Thk.
> >> Attached 2.475 2.173 0.233
> >>
> >>
> >>
> >>
> >
>
>
>